标图卫浴十大亮点：Ten Light spots of Biaotu Products:

1标图龙头的电镀镍厚度达到平均12um（普通低于8um）；铬厚度要达到平均值0.25um（普通低于0.15um）。

The thickness of nickel plating reaches an average of 12um (normal ones are less than 8um); the thickness of Chrome achieves the average 0.25um (normal ones are less than 0.15um)

2水龙头主体选用优质精质铜材，不含铅，高压铸造。

Main body of tap is made up of good quality copper and its lead free with high pressure die casting,

3表面经过五次电镀处理，镀层光滑、明亮、镀层均匀、附着力强（镀层按划格试验后，无起皮或脱落现象。镀层在温度150+10C下，保温1小时，无气泡，无起皱、开裂、剥落现象）。

Through five plating processing in the surface, the cladding is smooth and bright, well-plating distributed and good adhered. （After cross cut test， cladding is not scratching or dropping off. Being Hold under the temperature of 150+10C for 1 hour, cladding have no bubble, no crinkle, no crack and peeling.）

4阀体的强度在压力2.5Mpa的水压下，保压60秒无渗漏、无变形。

Value body can be hold without leakage and deformation under the pressure of 2.5Mpa in 60 seconds.

5龙头的核心------阀芯，采用硬度达到维氏硬度1000AV5以上的精密陶瓷片，标图水龙头采用优质进口陶瓷阀芯，经久耐磨，密封性好，可确保五十万次不漏水，国际标准30万次。陶瓷片之间接触面无形处于研磨之中，阀芯片吸附力更强，接触面就越光滑、耐磨，其性能越佳。

Core of valve which the core of a tap, using precise ceramic plate with Vickers hardness of 1000AV5. Biaotu chooses imported ceramic core of valve with high quality, so it is wear-resisting and owns good sealing, ensured watertight after using 500,000 times in normal standard and 300,000 times in international standard. Friction between interface and ceramic plates is unavoidable. However, The stronger adsorbability of core of valve is and the smoother and the better of wear-resisting the interface is, the better its capability is.

6六层过滤：防溅水，可以节水百分之三十，手柄平稳，轻便、无卡阻，与阀体连接牢固。有效过滤供水管道中的杂质，形成气泡混合水，避免出水口压力造成与盛水容器中的碰撞产生的噪音及溅水，形成柔和之水，带来好心情。

The six-layer filtering makes it waterproof and can save 30% water for you .The handle of tap is smooth, light, unimpeded and strongly connected with value body. So that it can filter the impurity from flow pipe effectively, and the forming bubbles mixed water can avoid noise and splashing in the water caused by the colliding between outlet with water pressure and vessel that retained water, the soft water can bring you good mood.

7标图浴缸龙头配套进水软管、花洒等功能，性能、整体配套质量好。

The bathtub tap is installing with inlet hose and shower, with good performance and quality.

8标图水龙头在出厂前，每一个均按照严于国际的“公司内控标准”进行严格质量检测，公司产品不合格率控制在100000/1.

Every tap in Biaotu should be in line with a strict test under the Company Standard, which is stricter than the international standard. Percent defective can be controlled within 100000/1.

9公司所有铸件产品壁厚均值大于0.25mm（市场部分产品低于0.15mm），真正做到货真价实。

All casting products thickness is more than 0.25mm, while part of products in the market is less than 0.15mm. It is really genuine goods at a fair price.

10标图公司所有卫浴产品终身保修。

All sanitary ware products in Biaotu are warranted lifelong.