Every procedure is meticulous. All products can not leave factory until they have finished the acid test, salt spray test and other testing procedures, which is the most significant link, and double check and package by workers to meet standards.

Biaotu dedicated on non-toxic and environmental faucets, which with less than 0.03% The faucets mainly have four materials, which are brass, PVC, cast iron(C.I.) and stainless steel. In the present domestic luxury market, pure copper is regarded as the main raw material. Experts express that trace lead would be mixed into product previously, in order to improve the casting property of copper alloy. Usually copper and bronze leading foundry products of the lead in content is 4%-8%, there are substances such as the lead to tap water could release inside, drinking too much water will lead the cause of poisoning, not only can affect the growth of drinkers intelligence, still can seriously affect physical health.

And now the country energetically advocate "energy conservation and emission reductions," green "and the situation the attention of the world expo is played the" green "theme, China of the latest" life sanitary standard for drinking water "(GB5749-2006) provisions shall not exceed 0. 01% lead in drinking water, California is from 2010 to and will use the new law, will ban all contain copper tube. Lead amount above 0.25%.

The metal surface of biaotu product is use the most modern processing technology, selectively remove copper alloy surface levels of lead. Because only removing surface UM on about the content of lead, so it doesn't affect the copper alloy corrosion resistance and other properties. And can reach at the casting products containing lead below zero. Below 03%, achieve: "green" be at ease use.

Ten Light spots of Biaotu Products:

1.The thickness of nickel plating reaches an average of 12um (normal ones are less than 8um); the thickness of Chrome achieves the average 0.25um (normal ones are less than 0.15um)

2.Main body of tap is made up of good quality copper and its lead free with high pressure die casting,

3.Through five plating processing in the surface, the cladding is smooth and bright, well-plating distributed and good adhered. （After cross cut test， cladding is not scratching or dropping off. Being Hold under the temperature of 150+10C for 1 hour, cladding have no bubble, no crinkle, no crack and peeling.）

4.Value body can be hold without leakage and deformation under the pressure of 2.5Mpa in 60 seconds.

5.Core of valve which the core of a tap, using precise ceramic plate with Vickers hardness of 1000AV5. Biaotu chooses imported ceramic core of valve with high quality, so it is wear-resisting and owns good sealing, ensured watertight after using 500,000 times in normal standard and 300,000 times in international standard. Friction between interface and ceramic plates is unavoidable. However, The stronger adsorbability of core of valve is and the smoother and the better of wear-resisting the interface is, the better its capability is.

6.The six-layer filtering makes it waterproof and can save 30% water for you .The handle of tap is smooth, light, unimpeded and strongly connected with value body. So that it can filter the impurity from flow pipe effectively, and the forming bubbles mixed water can avoid noise and splashing in the water caused by the colliding between outlet with water pressure and vessel that retained water, the soft water can bring you good mood.

7.The bathtub tap is installing with inlet hose and shower, with good performance and quality.

8.Every tap in Biaotu should be in line with a strict test under the Company Standard, which is stricter than the international standard. Percent defective can be controlled within 100000/1.

9.All casting products thickness is more than 0.25mm, while part of products in the market is less than 0.15mm. It is really genuine goods at a fair price.

10.All sanitary ware products in Biaotu are warranted lifelong.